Modification / Fixes Collection

Broken down by category

Hardware
Software
Accessory
​

Admin update: Please keep in mind that information can become outdated. Example: Current R2 printers come with the version 2 print bed, so a version 1 to version 2 conversion is not needed for the current R2 printers.

 

Hardware Modifications

• Heated Bed Wiring Conversion - Turn version 1 bed heater into a version 2 bed heater
• Case Lights - Add additional case lighting
• Case Lights Redux - G-code controlled lighting, expansion of previous Case Lights modification
• Leveling Knobs - Easy to turn Z axis knobs
• Promethius - Swap Hexagon hotend for a Promethius
• Case Lighting Again - Regain G-Code control of existing case lighting (requires solder rework)
• Fixed Camera Angle - Fixes angle for timelapse video, restores a 10° rotation in the web interface
• Z Plug - Z axis lead screw plug
• Titan Adapter - New add-on to existing extruder top to change the Robo default extruder to an E3D Titan.
• Tidy Filament Tube - Use this little hack to clean up loose filament tubing
• Capacitive Screen - Replace your R2 screen with a 5" capacitive touch screen
• Cooling Shroud - Replacement shroud for 40 mm hotend cooling can placement

 

Software and Operating System Modifications

• WiFi and Bluetooth - Disabling on the Raspberry Pi
• MESH for the R2 - Current Marlin release (not 100% compatible with RoboLCD)
• UBL for the R2 - Current Marlin release (not 100% compatible with RoboLCD)
• Setting Static IP - Modify your rPi image to use a static IP address

 

Accessories

• Hood - Encloses the top of the R2 printer to control chamber temperature
• Micro Spool Holder - Add on to hold small diameter spools
• Stylus Holder - Never lose the touchscreen stylus again
• Filament Cleaner - Clean and/or oil you filament, clips onto filament out sensor
• Filament Cleaner v2 - Clean and/or oil filament, mounts above extruder
• Top Cover - A protective cover for the top of your R2 printer

 

reserved

 

reserved