1. Got a question or need help troubleshooting? Post to the troubleshooting forum or Search the forums!

Need an image of the R2's microsd card.

Discussion in 'Troubleshooting' started by Brandon Groves, Jun 17, 2017.

Thread Status:
Not open for further replies.
  1. Brandon Groves

    Brandon Groves New Member

    Joined:
    Jan 23, 2014
    Messages:
    16
    Likes Received:
    12
    Does anyone have a backup image of the microsd card they can send me. I think mine is corrupted, and I didn't make a backup. My touch controller freezes if i go into the utility screen, and when i login to the octopi web interface it will only halfway load up. Any help would be greatly appreciated.
     
    #1 Brandon Groves, Jun 17, 2017
  2. Geof

    Geof Volunteer Moderator
    Staff Member

    Joined:
    Nov 9, 2015
    Messages:
    6,757
    Likes Received:
    2,339
    #2 Geof, Jun 17, 2017
    mark tomlinson likes this.
  3. mark tomlinson

    mark tomlinson ༼ つ ◕_ ◕ ༽つ
    Staff Member

    Joined:
    Feb 21, 2013
    Messages:
    23,912
    Likes Received:
    7,338
    They are supposed to be working this into their support scripting, but apparently have not gotten that completed yet.
    Sadly I do not have the R2 versinon either
     
    #3 mark tomlinson, Jun 17, 2017
  4. Brandon Groves

    Brandon Groves New Member

    Joined:
    Jan 23, 2014
    Messages:
    16
    Likes Received:
    12
    #4 Brandon Groves, Jun 17, 2017
    Last edited: Jun 17, 2017
  5. AlienBeans

    AlienBeans Active Member

    Joined:
    May 19, 2016
    Messages:
    110
    Likes Received:
    27
    Where is the microSD card located on the printer?
     
    #5 AlienBeans, Jun 17, 2017
  6. mark tomlinson

    mark tomlinson ༼ つ ◕_ ◕ ༽つ
    Staff Member

    Joined:
    Feb 21, 2013
    Messages:
    23,912
    Likes Received:
    7,338
    It is in the Raspberry Pi SD card slot. Bottom of Raspberry Pi, which is under the bed. If you jack the bed to the top you can open the bottom cover and see the Pi.
     
    #6 mark tomlinson, Jun 17, 2017
    AlienBeans and Geof like this.
  7. Todd Wessendorf

    Todd Wessendorf Active Member

    Joined:
    Feb 14, 2016
    Messages:
    125
    Likes Received:
    48
    Sent.
     
    #7 Todd Wessendorf, Jun 17, 2017
    Geof, Brandon Groves and mark tomlinson like this.
  8. mark tomlinson

    mark tomlinson ༼ つ ◕_ ◕ ༽つ
    Staff Member

    Joined:
    Feb 21, 2013
    Messages:
    23,912
    Likes Received:
    7,338
    #8 mark tomlinson, Jun 17, 2017
    Brandon Groves likes this.
  9. AlienBeans

    AlienBeans Active Member

    Joined:
    May 19, 2016
    Messages:
    110
    Likes Received:
    27
    Thanks. I saw that board and thought it looked like a Raspberry Pi, but had no idea this thing was actually controlled with one. I have a PI and love it. This is really cool. Definitely a good idea to have a backup image of that MicroSD card.
     
    #9 AlienBeans, Jun 17, 2017
    mark tomlinson likes this.
  10. mark tomlinson

    mark tomlinson ༼ つ ◕_ ◕ ༽つ
    Staff Member

    Joined:
    Feb 21, 2013
    Messages:
    23,912
    Likes Received:
    7,338
    Yep. A Pi :)
    With OctoPrint running on the pi which is running RoboOS (A flavor of Raspbian customized for the Robo a little bit)
     
    #10 mark tomlinson, Jun 17, 2017
    Brandon Groves likes this.
  11. Brandon Groves

    Brandon Groves New Member

    Joined:
    Jan 23, 2014
    Messages:
    16
    Likes Received:
    12
    #11 Brandon Groves, Jun 17, 2017
    Lance Weston, Kevin Kapoun, Redriche and 3 others like this.
  12. Brandon Groves

    Brandon Groves New Member

    Joined:
    Jan 23, 2014
    Messages:
    16
    Likes Received:
    12
    That was the problem, It worked like a charm, I'm back up and running again.:)
     
    #12 Brandon Groves, Jun 17, 2017
    supercazzola, Redriche, Eric Albert and 1 other person like this.
Thread Status:
Not open for further replies.

Share This Page