1. Got a question or need help troubleshooting? Post to the troubleshooting forum or Search the forums!

Was Thinking of selling original Prusa i3 MK2 Not Anymore

Discussion in 'Off Topic' started by aznhlfan, Mar 27, 2017.

  1. aznhlfan

    aznhlfan Active Member

    Joined:
    Sep 19, 2015
    Messages:
    383
    Likes Received:
    59
    I will

    Sent from my Galaxy S7 using Tapatalk
     
    Geof likes this.
  2. aznhlfan

    aznhlfan Active Member

    Joined:
    Sep 19, 2015
    Messages:
    383
    Likes Received:
    59
    when I try to use the "repair file" tool in the Prusa edition Slic3r, it creates an obj file. So I export it to the sd card, and it is an xxx.gcode.tmp file on the sd card. That is what I tried to print with that did not work. Is this not a real gcode file?
     
  3. aznhlfan

    aznhlfan Active Member

    Joined:
    Sep 19, 2015
    Messages:
    383
    Likes Received:
    59
    I figured it out, it was the slicers repair tool that was creating that file. I used nettfabb or what used to be netffabb. Then converted it into an stl file and then exported it to the sd card. I think I am going the long way around, that felt like wayyyy to many steps for 1 file.
     
    Geof likes this.
  4. Geof

    Geof Volunteer Moderator
    Staff Member

    Joined:
    Nov 9, 2015
    Messages:
    6,712
    Likes Received:
    2,320
    I have the paid netfabb so my repairs come out as .stl you can use the online version then imlort into 3d builder and export as .stl (the free way is always a few extra steps)

    As a "rule" for me i use a relair tool to repair and only use a slicer to slice the .stl into .gcode

    Keeps it simple.for me, glad you got it figured out!
     
  5. aznhlfan

    aznhlfan Active Member

    Joined:
    Sep 19, 2015
    Messages:
    383
    Likes Received:
    59
    Horrible print, even after repairing or printing straight without repairing. If I had hair I would pull it out.[​IMG]

    Sent from my Galaxy S7 using Tapatalk
     
  6. Geof

    Geof Volunteer Moderator
    Staff Member

    Joined:
    Nov 9, 2015
    Messages:
    6,712
    Likes Received:
    2,320
    Thats very odd. Pla ? Do you have pla chosen in the slicer ?
     
  7. aznhlfan

    aznhlfan Active Member

    Joined:
    Sep 19, 2015
    Messages:
    383
    Likes Received:
    59
    Yes, I use Hatchbox PLA, there is no Hatchbox in the slicer, so I chose Prusa PLA. Its 1.75

    Sent from my Galaxy S7 using Tapatalk
     
  8. Geof

    Geof Volunteer Moderator
    Staff Member

    Joined:
    Nov 9, 2015
    Messages:
    6,712
    Likes Received:
    2,320
    I'm going to slice something for you. Will you put it on the sd card and run it for me (doesn't need a slicer, its already sliced)
     
  9. aznhlfan

    aznhlfan Active Member

    Joined:
    Sep 19, 2015
    Messages:
    383
    Likes Received:
    59
    Sure, it will have to be when I get home from work.

    Sent from my Galaxy S7 using Tapatalk
     
  10. aznhlfan

    aznhlfan Active Member

    Joined:
    Sep 19, 2015
    Messages:
    383
    Likes Received:
    59
    I'm printing these right now.
     
    Geof likes this.

Share This Page