Shoutbox Archive

Nov 29, 2016 8:33 PM - WheresWaldo: That's cool, I would love to add that to tomorrow's set of files.
Nov 30, 2016 2:42 AM - jim3Dbot: Nice Job!................Danza, Great addition to WW's coding
Nov 30, 2016 4:09 AM - danzca6: Thanks. WW what you need is in your email
Nov 30, 2016 4:09 AM - Bill Monroe: morning
Nov 30, 2016 4:09 AM - danzca6: Morning Bill
Nov 30, 2016 4:10 AM - Bill Monroe: hey Dan, what it be?
Nov 30, 2016 4:13 AM - danzca6: It be early...haha... Trying to get motivated to head to work
Nov 30, 2016 4:13 AM - Bill Monroe: Early is my norm
Nov 30, 2016 4:14 AM - JeffTheMess: morning roboneers
Nov 30, 2016 4:14 AM - danzca6: I go back and forth. Cold nights I sleep like a rock.
Nov 30, 2016 4:16 AM - Bill Monroe: this is my first week in my new office.. has a woodstove so cold isnt an issue anymore
Nov 30, 2016 4:16 AM - JeffTheMess: cold in cali...say it aint so
Nov 30, 2016 4:16 AM - Bill Monroe: heck ya,,, it's 38 here right now
Nov 30, 2016 4:17 AM - Bill Monroe: one thing I didnt plan for, dogs
Nov 30, 2016 4:17 AM - JeffTheMess: how many
Nov 30, 2016 4:17 AM - JeffTheMess: Hey Dan Nice work for the marlin
Nov 30, 2016 4:17 AM - Bill Monroe: both of mine and the nieghborhood Pit Bull all seem to know the moment I lit the fire
Nov 30, 2016 4:17 AM - Bill Monroe: he Jeff
Nov 30, 2016 4:17 AM - Bill Monroe: i mean, hey jeff
Nov 30, 2016 4:21 AM - JeffTheMess: Whats going on Bill
Nov 30, 2016 4:22 AM - Bill Monroe: eh.. same ol.. right now trying to figure out how to set HSMWorks up to do 4 axis continuous machining.. and stepping over rugs that look a lot like dogs absorbing the heat..
Nov 30, 2016 4:22 AM - Bill Monroe: you?
Nov 30, 2016 4:25 AM - JeffTheMess: same here. printing a lot of xmas stuff for the wife
Nov 30, 2016 4:25 AM - Bill Monroe: oh joy
Nov 30, 2016 4:25 AM - danzca6: Hey Jeff thanks. Heading to work so I'll catch you both later
Nov 30, 2016 4:25 AM - Bill Monroe: take care, Dan
Nov 30, 2016 4:27 AM - JeffTheMess: see ya
Nov 30, 2016 4:27 AM - JeffTheMess: so the cnc going good so far
Nov 30, 2016 4:28 AM - Bill Monroe: ya.. seems to be rockin.. the CAM still vexes me occasionally
Nov 30, 2016 4:29 AM - Bill Monroe: think I might try going back to MasterCa
Nov 30, 2016 4:29 AM - Bill Monroe: MasterCam
Nov 30, 2016 4:30 AM - JeffTheMess: how big can you cut?
Nov 30, 2016 4:31 AM - Bill Monroe: 8.5 in in Y.... 17.7 in X.. without moving the work
Nov 30, 2016 4:32 AM - JeffTheMess: not to bad
Nov 30, 2016 4:32 AM - Bill Monroe: works for me, but more is always better
Nov 30, 2016 4:32 AM - JeffTheMess: the American way lol
Nov 30, 2016 4:32 AM - Bill Monroe:
Nov 30, 2016 4:36 AM - JeffTheMess: Have you been printing stuff lately, or is it purely cnc
Nov 30, 2016 4:37 AM - Bill Monroe: a few things.. for customer concept stuff.. my son has actually been doing them for me
Nov 30, 2016 4:38 AM - JeffTheMess: he is still flying quads?
Nov 30, 2016 4:38 AM - Bill Monroe: hasnt lately.. school and work has been keeping him busy
Nov 30, 2016 4:40 AM - JeffTheMess: shame...can never been to busy for a hobby
Nov 30, 2016 4:41 AM - Bill Monroe: heh ya, well he's focues right now.. gotta get through a calc class
Nov 30, 2016 4:43 AM - Bill Monroe: how about you? giving the Robo some exersize?
Nov 30, 2016 4:48 AM - JeffTheMess: oh yeah all the time it going strong still
Nov 30, 2016 4:48 AM - Bill Monroe: think I may give mine to some kid
Nov 30, 2016 4:50 AM - JeffTheMess: really? getting bored with plastic smells
Nov 30, 2016 4:50 AM - Bill Monroe: heh naw. I just like the one I made much better.. it's ABS so it really stinks up the place
Nov 30, 2016 4:51 AM - JeffTheMess: make a give away contest
Nov 30, 2016 4:51 AM - Bill Monroe: to Robo works just fine.. it's just PLA doesnt work for everything I need.. ABS does and I can use dissolvable support material
Nov 30, 2016 4:52 AM - Bill Monroe: i dunno... seems that kind of giveaway always results in the recipient not appreciating it... Case in point: Robbie
Nov 30, 2016 4:53 AM - Bill Monroe: the high schoolhere has a very active engineering program.. might find the right one there
Nov 30, 2016 4:54 AM - JeffTheMess: lol...didn't you have a young neighbor that helps you out sometimes with stuff
Nov 30, 2016 4:54 AM - Bill Monroe: ya,, the stinker hauled off and got accepted to west point
Nov 30, 2016 4:55 AM - JeffTheMess: that bastard
Nov 30, 2016 4:55 AM - Bill Monroe: i was really tickled when I heard
Nov 30, 2016 4:56 AM - Bill Monroe: he wants to fly helicopters
Nov 30, 2016 4:56 AM - Bill Monroe: <-- flew helicopters in the army
Nov 30, 2016 4:57 AM - JeffTheMess: thats pretty good
Nov 30, 2016 4:58 AM - JeffTheMess: gave you flash backs lol
Nov 30, 2016 4:59 AM - Bill Monroe: oh gawd,,, took me years to reconcile that expereince... flash backs.. my gawd
Nov 30, 2016 4:59 AM - Bill Monroe: so glad the country is more patriotic now
Nov 30, 2016 5:02 AM - JeffTheMess: slowly but surely
Nov 30, 2016 5:03 AM - Toro1966: Thanks for your service Bill!
Nov 30, 2016 5:04 AM - Bill Monroe: . my honor, Toro
Nov 30, 2016 5:04 AM - JeffTheMess: toro your military guy too right?
Nov 30, 2016 5:05 AM - Bill Monroe: when my fiurst son to go in-theater returned, I went to Dallas to greet him.. Didnt want him to go through what I did when I returned. I was stunned
Nov 30, 2016 5:06 AM - Bill Monroe: THOUSANDS of people formed a corridor at the airport cheering as the guys came off the plane.. I cried like a baby
Nov 30, 2016 5:08 AM - Bill Monroe: wow Trump is officially leaving taking himself out of his businesses... that's YUGE
Nov 30, 2016 5:13 AM - JeffTheMess: he "leaving" his business to his Blind trust AkA his kids
Nov 30, 2016 5:13 AM - JeffTheMess: im excited to see what he will do
Nov 30, 2016 5:15 AM - Bill Monroe: his kids do most of the operations anyway.. he's been doing other stuff
Nov 30, 2016 5:16 AM - Bill Monroe: he's coarse and needs to filter his networking a little but I like his goals and attitudes
Nov 30, 2016 5:16 AM - Bill Monroe: and it's been fun watching the libtards try to boost their egos
Nov 30, 2016 5:18 AM - Toro1966: Sorry jeff - was away. Yep - 22 years Navy
Nov 30, 2016 5:18 AM - Bill Monroe: ok, downloading Mastercam 2017
Nov 30, 2016 5:19 AM - JeffTheMess: thanks for your service
Nov 30, 2016 5:19 AM - Bill Monroe: well then, thank you too, Toro!
Nov 30, 2016 5:19 AM - Toro1966: Thank you sir.
Nov 30, 2016 5:19 AM - Toro1966: Will see how long they let me stay
Nov 30, 2016 5:20 AM - JeffTheMess: oh your still in?
Nov 30, 2016 5:20 AM - Bill Monroe: they only let me stay 3 years... but gave me an option to move to another group
Nov 30, 2016 5:20 AM - Toro1966: Yup - still in. Haven't found anything else I am better at lol
Nov 30, 2016 5:21 AM - Bill Monroe: what rate?
Nov 30, 2016 5:22 AM - Bill Monroe: oh wait.. do they still use that term?
Nov 30, 2016 5:22 AM - Toro1966: Lol - nope - not as of a month ago..... We are going to a Marine and Army model where you get an MOS. But I am an Officer so I don't have one. I am a shipdriver by trade. Destroyers.
Nov 30, 2016 5:24 AM - Bill Monroe: ahh my dad was on a destroyer for Korea... i think they were a little different in those days
Nov 30, 2016 5:25 AM - Bill Monroe: in elemntary school, my best freind's dad happened to be stationed on the same ship.. got to do a tiger cruise back from hawaii on it
Nov 30, 2016 5:25 AM - Toro1966: Just a little different. Took my son on a tiger cruise from HI to WA state. Was awesome.
Nov 30, 2016 5:25 AM - danzca6: I'm back...hey Toro
Nov 30, 2016 5:26 AM - Bill Monroe: ya it was sure fun.. ship only had 12 regulars on it, 3rd mate in charge
Nov 30, 2016 5:26 AM - Bill Monroe: i got to drive it a LOT!
Nov 30, 2016 5:27 AM - Toro1966: Hey Dan - welcome back!
Nov 30, 2016 5:27 AM - danzca6: yeah, long drive in today
Nov 30, 2016 5:28 AM - Toro1966: Here's my last ship
Nov 30, 2016 5:28 AM - danzca6: yes, I saw that
Nov 30, 2016 5:28 AM - danzca6: you surprise me man
Nov 30, 2016 5:28 AM - Toro1966: Why's that lol
Nov 30, 2016 5:29 AM - Bill Monroe: it's the Nathan James!
Nov 30, 2016 5:29 AM - danzca6: I had no idea just how awesome you really are

 

Nov 30, 2016 5:29 AM - danzca6: haha
Nov 30, 2016 5:30 AM - Toro1966: Lol. Appreciate that. I am just lucky my wife and kid think I am pretty ok. That works for me lol
Nov 30, 2016 5:30 AM - Toro1966: I had command of USS SHOUP DDG 86. Loved that ship.
Nov 30, 2016 5:30 AM - Bill Monroe: this was my Dad's:
Nov 30, 2016 5:30 AM - Toro1966: Ironically my entire family went enlisted. I am the only officer of the bunch.
Nov 30, 2016 5:30 AM - danzca6: Being a top dog on a destroyer is pretty awesome
Nov 30, 2016 5:30 AM - Bill Monroe: ok, that didnt work
Nov 30, 2016 5:30 AM - Toro1966: My father's a retired chief (E7)
Nov 30, 2016 5:31 AM - JeffTheMess: and here you are stuck with us toro
Nov 30, 2016 5:31 AM - JeffTheMess: lol
Nov 30, 2016 5:31 AM - Bill Monroe: https://en.wikipedia.org/wiki/File:USS_Rogers_(DD-876)_in_the_South_China_Sea_in_1973.jpg
Nov 30, 2016 5:31 AM - Toro1966: You guys are awesome Jeff. Can't tell you how much I've learned from you guys!
Nov 30, 2016 5:31 AM - Toro1966: Yup - just a little different from mine Bill
Nov 30, 2016 5:32 AM - Toro1966: Now I get to shine a seat in DC. Not as much fun lol
Nov 30, 2016 5:32 AM - Bill Monroe: heh I remember it like yesterday... great fun.. great guys... great food
Nov 30, 2016 5:32 AM - Bill Monroe: we met up with the Hancock the day before port.. had F-4s doing low passes above sonic..
Nov 30, 2016 5:32 AM - Toro1966: Exactly. The people are the reason we go to work everyday.
Nov 30, 2016 5:33 AM - Toro1966: Hope you guys have an awesome day - have to go earn my paycheck! It's your taxes after all
Nov 30, 2016 5:33 AM - Bill Monroe: in a wierd way, the Navy helped me get a warrant in the army
Nov 30, 2016 5:33 AM - danzca6: haha...take care Toro
Nov 30, 2016 5:33 AM - Toro1966: That's awesome. Have had several friends that did just that. Navy to Warrant pilot
Nov 30, 2016 5:33 AM - Bill Monroe: cya later
Nov 30, 2016 5:33 AM - danzca6: Money well spent IMO
Nov 30, 2016 5:33 AM - Toro1966: Take care guys
Nov 30, 2016 5:35 AM - Bill Monroe: well in my case, I got drafted - told an army recruiter that if I didnt get to fly I would join the navy... showed him my civie pilots license and took some tests.. bingo, Warrant Officer Monroe
Nov 30, 2016 5:36 AM - danzca6: did you fly in the military then?
Nov 30, 2016 5:36 AM - Bill Monroe: ya, army UH-1B
Nov 30, 2016 5:37 AM - danzca6: copter?
Nov 30, 2016 5:38 AM - Bill Monroe: yes.. "Huey"
Nov 30, 2016 5:38 AM - danzca6: I thought you were a plane guy. Nice.
Nov 30, 2016 5:38 AM - danzca6: that has to be a bit different than a plane
Nov 30, 2016 5:39 AM - Bill Monroe: the one I flew is now an outdoor display at Ft Jackson.. stripped of all the good stuff and covererd in pidgeon shit
Nov 30, 2016 5:39 AM - JeffTheMess: what do you like flying more?
Nov 30, 2016 5:39 AM - Bill Monroe: ya, it's different but not hard..
Nov 30, 2016 5:39 AM - Bill Monroe: vintage planes swing-wings are always trying to kill you
Nov 30, 2016 5:45 AM - danzca6: amazing talent for sure in these forums
Nov 30, 2016 5:46 AM - Bill Monroe: funny, now that a FORMER official at Breitbart is going to be in government, lots of adtertizers are canceling... seems it was ok while he was still running Breitbart, but not now
Nov 30, 2016 6:07 AM - daniel871: http://www.visir.is/section/MEDIA99?fileid=CLP50041
Nov 30, 2016 6:09 AM - daniel871: Also, got a laugh out of this headline: http://gizmodo.com/elon-musk-says-his-smart-solar-roof-could-cost-less-tha-1789121778
Nov 30, 2016 7:32 AM - daniel871:
Nov 30, 2016 7:37 AM - danzca6: is it wrong to be jealous of how much hair a dog has?
Nov 30, 2016 9:04 AM - JeffTheMess: maybe
Nov 30, 2016 9:04 AM - JeffTheMess: http://www.techeblog.com/index.php/...and-creative-computer-setups-geeks-would-love
Nov 30, 2016 9:06 AM - JeffTheMess: just admire that first one for a bit
Nov 30, 2016 9:52 AM - daniel871:
Nov 30, 2016 10:35 AM - JeffTheMess: I love it
Nov 30, 2016 10:52 AM - JeffTheMess:
Nov 30, 2016 11:31 AM - WheresWaldo: Now that is just dumb
Nov 30, 2016 11:34 AM - JeffTheMess: Draculas?
Nov 30, 2016 12:44 PM - daniel871:

 

Dec 1, 2016 at 4:10 AM - JeffTheMess: morning roboneers
Dec 1, 2016 at 4:17 AM - Bill Monroe: Morning Jeff
Dec 1, 2016 at 4:37 AM - JeffTheMess: hows it going
Dec 1, 2016 at 4:37 AM - JeffTheMess: my rocker switch to power my robo is stuck on ON position lol can you believe it
Dec 1, 2016 at 4:39 AM - Bill Monroe: Yes, actually I can.. happened to me
Dec 1, 2016 at 4:40 AM - Bill Monroe: i got a new one from robo, loosened the screws to change it and it started working again.. been fine ever since
Dec 1, 2016 at 4:42 AM - JeffTheMess: yeah planning to stop by radio shack to scoop it up
Dec 1, 2016 at 4:50 AM - Bill Monroe: have you removed it yet?
Dec 1, 2016 at 4:52 AM - JeffTheMess: nope im running a print right now
Dec 1, 2016 at 4:53 AM - Bill Monroe: id try that, just to see if it gets freed up
Dec 1, 2016 at 4:54 AM - JeffTheMess: yeah, i'd rather try and fix it first then get a new one...put this degree to work
Dec 1, 2016 at 4:56 AM - Bill Monroe: heh I still have the switch robo sent along with a new power supply
Dec 1, 2016 at 4:57 AM - JeffTheMess: yeah, keep you never know when china parts go bad
Dec 1, 2016 at 5:01 AM - Bill Monroe: ordered a power supply for my anodizing operation yesterday
Dec 1, 2016 at 5:03 AM - JeffTheMess: oh nice
Dec 1, 2016 at 5:03 AM - Bill Monroe: hey! my neighbor got his coyote back!
Dec 1, 2016 at 5:04 AM - Bill Monroe: brb
Dec 1, 2016 at 5:16 AM - Bill Monroe: back
Dec 1, 2016 at 5:17 AM - Bill Monroe: neighbor down the road had a coyote puppy wander on to his property about 6 years ago.. thought it was a dog.. took it in.
Dec 1, 2016 at 5:17 AM - Bill Monroe: Didnt find out it was a coyote until he took it to the vet maybe 6 mos later
Dec 1, 2016 at 5:18 AM - Bill Monroe: by then it was bonded and there was no way he was giving it up, so he's been careful with him..
Dec 1, 2016 at 5:18 AM - Bill Monroe: but some yay-hoo seasonal renter called animal control and they took him
Dec 1, 2016 at 5:18 AM - JeffTheMess: wow...plus once a human touches a wild animal they others won't let them into their area
Dec 1, 2016 at 5:18 AM - Bill Monroe: he's been fighting to get him back ever since..
Dec 1, 2016 at 5:19 AM - JeffTheMess: I would too
Dec 1, 2016 at 5:19 AM - JeffTheMess: is that a law in Cali about owning a cayote
Dec 1, 2016 at 5:19 AM - Bill Monroe: he's really something... rides in his jeep
Dec 1, 2016 at 5:20 AM - Bill Monroe: at least in this county it is.. no wild animals
Dec 1, 2016 at 5:20 AM - Bill Monroe: really I think the only ones to care are cat owners... one thing I like about coyotes.. they think cats are mighty tasty
Dec 1, 2016 at 5:21 AM - JeffTheMess: lol oh yeah, thats why they sell their urine to keep cats away
Dec 1, 2016 at 5:22 AM - Bill Monroe: they're not dogs, not even canines.. no relation whatsoever, but they have a lot of traits as dogs.. most people dont realize he's a coyote.. takes him off-leash walks, rides with him in his jeep...
Dec 1, 2016 at 5:22 AM - Bill Monroe: my dogs were sleeping next to the fire, then jumped up together and ran out the door...
Dec 1, 2016 at 5:23 AM - JeffTheMess: thats pretty cool....you have a poodle I have a fucking coyote *wins*
Dec 1, 2016 at 5:23 AM - Bill Monroe: I looked outside and here comes his coyote... with him follwing up the road.. he always runs ahead cuz he knows he'scoming here and my dogs love him
Dec 1, 2016 at 5:24 AM - JeffTheMess: yeah thats pretty cool you should take a picture
Dec 1, 2016 at 5:25 AM - Bill Monroe: plus, he really likes 2.0's chicken jerky treats
Dec 1, 2016 at 5:25 AM - Bill Monroe: i have a few somewhere....
Dec 1, 2016 at 5:26 AM - Bill Monroe: he likes to walk behind you and grab your pantleg
Dec 1, 2016 at 5:28 AM - Bill Monroe: my neighbor has been alone so long, we were glad to see him adopt a pet
Dec 1, 2016 at 5:29 AM - Bill Monroe: kinda look like he was slipping into a bad state
Dec 1, 2016 at 5:39 AM - JeffTheMess: sucks but now he should be good
Dec 1, 2016 at 5:42 AM - Bill Monroe: yup
Dec 1, 2016 at 7:07 AM - daniel871: https://scontent-iad3-1.cdninstagram.com/t50.2886-16/14253600_103729273418821_1164113618_n.mp4
Dec 1, 2016 at 9:29 AM - David Sale: Sorry, did some one say the Coyote was not a canine?
Dec 1, 2016 at 10:00 AM - JeffTheMess: yep
Dec 1, 2016 at 10:02 AM - daniel871: Yeah, I laughed at that too, but didn't figure it was worth arguing about.
Dec 1, 2016 at 10:03 AM - daniel871: Literally Genus Canis.
Dec 1, 2016 at 10:51 AM - David Sale: Well I do not mean it in any way negative, but Coyotes have known to breed with a specific group of wolf creating a reproductively viable new group called the Coywolf..
Dec 1, 2016 at 11:40 AM - daniel871: Well, that kickstarter delta I'm getting has been posting videos on Youtube for various stages of assembly over the last day. https://www.youtube.com/channel/UCfs61yeono184r1-yJJxMtw/videos?shelf_id=0&sort=dd&view=0
Dec 1, 2016 at 11:43 AM - toymaker: im thinking about converting 1 of my rostocks to a laser cutter
Dec 1, 2016 at 12:04 PM - JeffTheMess: ^Why
Dec 1, 2016 at 12:17 PM - daniel871: Seems like a tremendous waste of a Rostock.
Dec 1, 2016 at 12:18 PM - daniel871: Mostly because the delta platform won't play very nicely with any laser powerful enough to cut anything as opposed to simply burning lines in paper.
Dec 1, 2016 at 12:21 PM - daniel871: I mean, yeah, it's been done, but the ones that have been made have been engravers, not cutters.
Dec 1, 2016 at 12:21 PM - daniel871: (because the lasers powerful enough to actually cut something are too heavy for the delta platform to move accurately at the same speeds it can move a bowden hotend setup)
Dec 1, 2016 at 12:22 PM - daniel871: A blu-ray reader laser/salvaged LightScribe(tm) laser are nowhere near powerful enough to cut something, they can just burn lines in things.
Dec 1, 2016 at 12:24 PM - daniel871: Well, I say it's been done. That FLUX delta from back in 2014 that claimed to have a laser head hasn't been sold yet.
Dec 1, 2016 at 12:24 PM - JeffTheMess: use it about 1000 times it will cut
Dec 1, 2016 at 12:41 PM - toymaker: i want to teach kids about lasers, education purpuses etc
Dec 1, 2016 at 12:45 PM - daniel871: "Whatever you do kids, don't look at the machine while the laser is running or you'll go blind"
Dec 1, 2016 at 12:45 PM - daniel871: "Awwww...."
Dec 1, 2016 at 2:01 PM - daniel871: Christmas Greeting Card image:
Dec 1, 2016 at 6:40 PM - MChrisP1: Printing anything good tonight Geof?
Dec 1, 2016 at 7:03 PM - Geof: Hey buddy. Production jobs tonight on all the machines. Nothing fun.

 

Dec 2, 2016 at 2:18 AM - Bill Monroe: morning
Dec 2, 2016 at 4:45 AM - JeffTheMess: morning roboneers
Dec 2, 2016 at 4:48 AM - JeffTheMess: love seeing customers bring me 3d printed part on there products
Dec 2, 2016 at 4:59 AM - Bill Monroe: Hey Jeff
Dec 2, 2016 at 5:21 AM - danzca6: Anyone back the R2/C2? I see they sent a survey to the C2 backers on the 28th and wondered what it said since that should have been when they were shipping the C2 printers
Dec 2, 2016 at 5:26 AM - danzca6: ah, looks like they are a week behind and the survey was asking shipping address info
Dec 2, 2016 at 5:33 AM - Bill Monroe: there was a lot of hype, but i've not seen or nor do I know anyone that has
Dec 2, 2016 at 5:34 AM - Bill Monroe: im not really looking though
Dec 2, 2016 at 5:35 AM - danzca6: morning bill
Dec 2, 2016 at 5:36 AM - Bill Monroe: hey Dan
Dec 2, 2016 at 5:37 AM - daniel871: I think most of us that actually talk in this Shoutbox were laughing at how badly managed that kickstarter was at the time it was going on.
Dec 2, 2016 at 5:38 AM - danzca6: morning daniel
Dec 2, 2016 at 5:38 AM - daniel871: Morning. Waiting on the coffee to finish brewing.
Dec 2, 2016 at 5:39 AM - danzca6: right....I'm stuck in first gear this morning and missed getting my caffeine out the door today
Dec 2, 2016 at 5:39 AM - daniel871: So hey, the latest Windows 10 updates broke the version of Solidworks we've been using.
Dec 2, 2016 at 5:40 AM - daniel871: Solution? Set up Windows 7 in Hyper-V and run it from there.
Dec 2, 2016 at 5:40 AM - daniel871: Because Solidworks was pretty hilarious about telling my employer what I told them a year ago when other issues were going on.
Dec 2, 2016 at 5:41 AM - danzca6: yeah the auto updates are crap...when it comes to a business install they should be controlled and tested prior to pushing
Dec 2, 2016 at 5:41 AM - daniel871: Solidworks gives zero fucks about supporting anything that isn't the current version of the software, and fuck you if you don't have a maintenance agreement.
Dec 2, 2016 at 5:41 AM - daniel871: Which I get, personally, but nobody else in the company I work for understands how software licensing actually works.
Dec 2, 2016 at 5:42 AM - JeffTheMess: Ive heard that a millions times over
Dec 2, 2016 at 5:43 AM - daniel871: What kills me is the sticker shock attitude they have about the cost of the software.
Dec 2, 2016 at 5:44 AM - daniel871: One unit we design sells for over 100,000 with a material/labor cost of about 35,000 and they piss and moan about software that only costs maybe 2,000 a year to keep up to date.
Dec 2, 2016 at 5:45 AM - daniel871: Sold a dozen systems this year alone. We ought to be able to afford to keep the software up to date just on the residual maintenance/spare parts we sell off of one unit.
Dec 2, 2016 at 5:48 AM - JeffTheMess: that always make me laugh..."we simply can't afford to lose money in my pocket"
Dec 2, 2016 at 5:49 AM - daniel871: We lost a huge customer this year because one of the VPs forgot to make sure who was actually copied on an email before hitting Reply All and saying something smartass about one of the customer contacts.
Dec 2, 2016 at 5:50 AM - daniel871: I never got to see the actual email but Hoooooooooly shit it must have been pretty bad.
Dec 2, 2016 at 5:50 AM - daniel871: You know when someone that works in a maintenance department at a fucking paper mill takes offense to something said about them that you've fucked up.
Dec 2, 2016 at 5:50 AM - JeffTheMess: still works there?
Dec 2, 2016 at 5:51 AM - daniel871: Oh yeah. VP with most seniority and mostly responsible for a lot of the early growth the company had building contacts in the industry.
Dec 2, 2016 at 5:54 AM - daniel871: This guy and the owner were the ones that founded the company back in 1993 and built things up from a simple machine shop, so this guy isn't going anywhere until he retires or has a stroke.
Dec 2, 2016 at 5:58 AM - danzca6: I try to never say anything that could be seen as offensive in an email. Might just send it to one or two people that it won't offend, but then they accidently/purposefully send it to others and then you are screwed.
Dec 2, 2016 at 6:00 AM - JeffTheMess: well atleast he has that going for him
Dec 2, 2016 at 6:05 AM - daniel871: I think it was literally something like "Why is that guy being such a bitch about this? Jesus Christ what a faggot" or something because I don't see much anything else getting that kind of reaction from a customer.
Dec 2, 2016 at 6:06 AM - daniel871: One of the call reports from our Sales department had something like "Just had a terrible visit at the mill where I was told to make arrangements to get all of our products out of this mill due to an employee of ours saying something terrible about the customer"
Dec 2, 2016 at 6:07 AM - daniel871: "I wasn't told what the actual remark was, but the contact said he'd never read anything so unprofessional in his 40 years in the industry and the corporate executives are going to ban us from all mills owned by this company"
Dec 2, 2016 at 6:08 AM - daniel871: Which is only 6 paper mills out of the hundreds that are around the US, but still.
Dec 2, 2016 at 6:10 AM - JeffTheMess: wow pretty bad
Dec 2, 2016 at 6:11 AM - daniel871: Yeah, when the mill basically says "Get all of your shit out of here" it's pretty messed up.
Dec 2, 2016 at 6:13 AM - daniel871: I wonder when the followup "And refund all of the money we spent on your shit" is going to come.
Dec 2, 2016 at 6:14 AM - JeffTheMess: lol yeah that can't happen
Dec 2, 2016 at 6:16 AM - daniel871: It can for the things that were in storage that hadn't been used yet.
Dec 2, 2016 at 6:17 AM - daniel871: Like the handful of Capital Projects that hadn't been installed yet.
Dec 2, 2016 at 6:19 AM - daniel871: That's if they don't calm down and decide to use what they've bought and just tell us to go to hell for future business.
Dec 2, 2016 at 6:21 AM - daniel871: Anyway, warning about volume on this one, turn it down before it plays for very long: https://vtt.tumblr.com/tumblr_ohff47hvso1qzfeby.mp4#_=_
Dec 2, 2016 at 6:25 AM - daniel871: Palate cleanser:
Dec 2, 2016 at 6:58 AM - JeffTheMess: Dank meme are kings

 

Dec 2, 2016 8:09 PM - Marquis Johnson: Every time I come back I can't find the firmware link :'(
Dec 3, 2016 6:30 AM - danzca6: It's called bookmarks Marquis...haha
Dec 3, 2016 7:19 AM - Bill Monroe: morning

 

Dec 4, 2016 4:49 AM - jbigler1986: Morning fellas
Dec 4, 2016 5:16 AM - Bill Monroe: JB!
Dec 4, 2016 5:16 AM - Bill Monroe: morning
Dec 4, 2016 6:36 AM - jbigler1986: How is it going
Dec 4, 2016 6:45 AM - Bill Monroe: Pretty OK.. how you been? been awhile
Dec 4, 2016 8:50 AM - jbigler1986: Great. Just insanely busy
Dec 4, 2016 9:27 AM - jbigler1986: Enganged to the new lady.
Dec 4, 2016 11:45 AM - Bill Monroe: some people never learn

 

Dec 5, 2016 at 4:36 AM - daniel871: Sheesh, some folks have way too much time on their hands (follow up on the previous meme video).
Dec 5, 2016 at 4:48 AM - jbigler1986: Haha bill. Same could be said for you then with 2.0. Lol
Dec 5, 2016 at 4:59 AM - Bill Monroe: yup..
Dec 5, 2016 at 4:59 AM - Bill Monroe: 12/9 = anniversary 4
Dec 5, 2016 at 5:31 AM - jbigler1986: Nice
Dec 5, 2016 at 5:34 AM - Bill Monroe: flying her to Sedona for a few days
Dec 5, 2016 at 5:59 AM - JeffTheMess: morning robonauts
Dec 5, 2016 at 6:00 AM - JeffTheMess: JB was on!?
Dec 5, 2016 at 6:00 AM - Bill Monroe: hey Jeff
Dec 5, 2016 at 6:06 AM - JeffTheMess: Hey Bill, whats going on
Dec 5, 2016 at 6:06 AM - Bill Monroe: nuttin much.. working on the design for the door router.. how about you?
Dec 5, 2016 at 6:07 AM - JeffTheMess: printing stuff too, hopefully the printer will spit out something worth selling one day lol
Dec 5, 2016 at 6:08 AM - Bill Monroe:
Dec 5, 2016 at 6:08 AM - Bill Monroe: had an engineer here that was convinced a printed sponge holder for a double sink would set the world on fire
Dec 5, 2016 at 6:10 AM - JeffTheMess: lol, yeah crap like that is dumb,
Dec 5, 2016 at 6:10 AM - Bill Monroe: company thought he was a god
Dec 5, 2016 at 6:10 AM - JeffTheMess: people don't understand that every idea isn't always a good one
Dec 5, 2016 at 6:11 AM - Bill Monroe: he would throw some many calculations at the management that they assumed he knew what he was talking about, and ANYthing said negative would bring swift reprisal
Dec 5, 2016 at 6:14 AM - JeffTheMess: but hey we have president Trump so might as well see what sticks with people
Dec 5, 2016 at 7:59 AM - jbigler1986: Im here still. Kind of
Dec 5, 2016 at 8:13 AM - WheresWaldo: @jbigler1986, this means what exactly?
Dec 5, 2016 at 8:46 AM - JeffTheMess: JB is like Batman lurking the dark parts of the robo forum correcting people 3d printing crimes
Dec 5, 2016 at 11:03 AM - BryZad: How is everyone doing this afternoon
Dec 5, 2016 at 1:58 PM - daniel871: Laughing my ass off at what one of the former CEOs of Makerbot is trying to do.
Dec 5, 2016 at 1:58 PM - daniel871: https://bre.co/
Dec 5, 2016 at 1:58 PM - daniel871: Fuck that guy.
Dec 5, 2016 at 2:49 PM - BryZad: What ??? The hell is that
Dec 5, 2016 at 5:35 PM - jbigler1986: Im back. Ha
Dec 5, 2016 at 6:49 PM - Bill Monroe: good evening
Dec 5, 2016 at 6:57 PM - Geof: Hi gents
Dec 5, 2016 at 7:10 PM - Bill Monroe: geof
Dec 5, 2016 at 7:27 PM - Geof: How doin bill

 

Dec 6, 2016 at 4:05 AM - JeffTheMess: good morning roboneers
Dec 6, 2016 at 4:07 AM - JeffTheMess: Bre is one of those guys that should never be the face of ANY company because how awkward he is
Dec 6, 2016 at 5:27 AM - Bill Monroe: mornin
Dec 6, 2016 at 5:30 AM - JeffTheMess: hey bill in your experience would these be liable for printing? low torque low speed?
Dec 6, 2016 at 5:31 AM - Bill Monroe: hard to tell from a pic.. but my motto has been "one test is worth a thousand expert opinions"
Dec 6, 2016 at 5:33 AM - Bill Monroe: whats the application?
Dec 6, 2016 at 5:35 AM - JeffTheMess: a small system to go along a 3d printed small wind turbine
Dec 6, 2016 at 5:35 AM - Bill Monroe: nice
Dec 6, 2016 at 5:37 AM - JeffTheMess: my neighbors might cut down some tree bringing me alot of light and wind so might take a crack at it
Dec 6, 2016 at 5:38 AM - Bill Monroe: sounds like fun
Dec 6, 2016 at 5:38 AM - Bill Monroe: 7-8 years ago the windfarm corp in the palm springs area was tearing out some small mills replacing them with the monster turbines...
Dec 6, 2016 at 5:39 AM - Bill Monroe: I asked if I could buy one of the old ones.. they said I could just have one as they were going to scrap them
Dec 6, 2016 at 5:39 AM - JeffTheMess: oh yeah, we will see how all this alternate energy comes about with the next 4 years
Dec 6, 2016 at 6:07 AM - daniel871: http://i.imgur.com/ATWMNi8.gifv
Dec 6, 2016 at 6:11 AM - JeffTheMess: What the fuck did I just watch!?
Dec 6, 2016 at 6:38 AM - daniel871: Some weirdo in a giant slinky suit freaking out some asians.
Dec 6, 2016 at 6:43 AM - Bill Monroe: Next project for Mill:
Dec 6, 2016 at 6:43 AM - Bill Monroe:
Dec 6, 2016 at 6:45 AM - JeffTheMess: what is it
Dec 6, 2016 at 6:45 AM - Bill Monroe: trigger guard for a vintage Mossberg 44US target rifle
Dec 6, 2016 at 6:46 AM - Bill Monroe: made in the 40s.. original guards were plastic and most have since either broken, shrunk, or both, just from age
Dec 6, 2016 at 6:47 AM - Bill Monroe: when the CMP was selling the rifles, someone was making aluminum replacements but the rifles are all gone now and the replacement guards have vanished
Dec 6, 2016 at 7:30 AM - daniel871: Sounds like it'd be a neat side-project to make a lost-PLA cast/mold for making some poured aluminum replacements if you ever get really bored.
Dec 6, 2016 at 7:53 AM - daniel871: Oh hey, this is a thing. https://santatracker.google.com/village.html
Dec 6, 2016 at 8:02 AM - JeffTheMess: my little one will love that
Dec 6, 2016 at 10:39 AM - daniel871:
Dec 6, 2016 at 10:45 AM - BryZad: The feels
Dec 6, 2016 at 6:27 PM - BryZad: anyone home

 

Dec 7, 2016 at 4:07 AM - JeffTheMess: morning robonauts
Dec 7, 2016 at 5:52 AM - Bill Monroe: Morning
Dec 7, 2016 at 9:40 AM - Ghost: Morning any one here that can help me with test flight?
Dec 7, 2016 at 11:40 AM - Geof: Hi Ghost. Your best bet will be to start a thread buddy.
Dec 7, 2016 at 3:46 PM - Toro1966: Evening all
Dec 7, 2016 at 7:03 PM - danzca6: http://www.monoprice.com/product?p_id=15711 MP Select i3 Plus only $399
Dec 7, 2016 at 7:06 PM - Bill Monroe: you get what you pay for
Dec 7, 2016 at 7:17 PM - danzca6: true

 

Dec 8, 2016 4:21 AM - daniel871: If that were true, my R1 would have run circles around my Monoprice i3 instead of the other way around.
Dec 8, 2016 4:22 AM - daniel871: Yeah, you get what you pay for, except for when you pay for an overpriced, poorly QCed machine.
Dec 8, 2016 6:09 AM - Bill Monroe: morning
Dec 8, 2016 6:25 AM - Toro1966: Morning all.
Dec 8, 2016 6:28 AM - Bill Monroe: Toro
Dec 8, 2016 6:31 AM - Toro1966: What's up Bill.
Dec 8, 2016 6:32 AM - Toro1966: Been busier than a one legged man in a butt kicking contest
Dec 8, 2016 6:34 AM - Bill Monroe: right now ust makingsome rifle trigger guards.. anniversary is Friday so will be flying up to joshua Tree.. other than that, xmas shopping on-line
Dec 8, 2016 6:35 AM - Bill Monroe: and watching my 2014 vintage Robo make perfect parts, every time.
Dec 8, 2016 6:38 AM - Toro1966: excellent - surprised you can still do that in California Just klidding
Dec 8, 2016 6:39 AM - Bill Monroe: oh, the lt governor thinks he can dictate lifestyle to the masses.. he's got some wakeup calls coming
Dec 8, 2016 6:39 AM - Toro1966: I have two Robos and one makes very good parts. The other i'll be adding an E3DV6 for in a week or so. I already have it (CYberMOnday Sale) but haven't had a chance to install
Dec 8, 2016 6:40 AM - Bill Monroe: i used the hex until the nozzle wore, then switched... easier to play with nozzle types.. but the hex did fine
Dec 8, 2016 6:41 AM - Bill Monroe: right now mine is printing thr third variant for the trigger guard
Dec 8, 2016 6:41 AM - Bill Monroe: <-- making money with his Robo
Dec 8, 2016 7:15 AM - Toro1966: Nice!
Dec 8, 2016 8:52 AM - Geof: hi gents
Dec 8, 2016 10:28 AM - Bill Monroe: hello
Dec 8, 2016 10:41 AM - JeffTheMess: http://www.gearbest.com/3d-printers-3d-printer-kits/pp_337314.html
Dec 8, 2016 10:42 AM - Bill Monroe: Jeff
Dec 8, 2016 10:43 AM - JeffTheMess: what going on on this Thursday
Dec 8, 2016 10:43 AM - Bill Monroe: jus workin.. you?
Dec 8, 2016 10:44 AM - JeffTheMess: same here, lock in a chamber yay me
Dec 8, 2016 10:44 AM - Bill Monroe: heh.. boss here is out of town till Monday so stress is low
Dec 8, 2016 10:45 AM - JeffTheMess: lucky you
Dec 8, 2016 10:45 AM - Bill Monroe: ya no shit..
Dec 8, 2016 10:47 AM - Bill Monroe: gotta pack the plane tonight.. get it fueled
Dec 8, 2016 10:47 AM - Bill Monroe: already got the O2 serviced
Dec 8, 2016 10:48 AM - JeffTheMess: nice
Dec 8, 2016 10:48 AM - Bill Monroe: taking 2.0 to Sedona for anniversary tomorrow
Dec 8, 2016 10:54 AM - JeffTheMess: nice
Dec 8, 2016 10:54 AM - Bill Monroe: got big plans for the weekend?
Dec 8, 2016 11:00 AM - JeffTheMess: printing, Christmas parade, and working
Dec 8, 2016 11:30 AM - Bill Monroe: not a bad weekend at all
Dec 8, 2016 12:20 PM - JeffTheMess: https://www.amazon.com/Neonode-Airb...09-20&linkId=89796c036e2390117f16fedb0e3590ab turn your laptop to touchscreen
Dec 8, 2016 12:49 PM - daniel871: Welp, this is one way to make a filament counter. https://create.arduino.cc/projecthu...da?ref=platform&ref_id=424_recent___&offset=1
Dec 8, 2016 1:43 PM - daniel871: http://i.imgur.com/r9CE6F8.gifv

 

Dec 9, 2016 4:08 AM - JeffTheMess: the mouse counter looks like a good idea
Dec 9, 2016 4:08 AM - JeffTheMess: morning robonauts
Dec 9, 2016 5:09 AM - Bill Monroe: morning
Dec 9, 2016 5:12 AM - JeffTheMess: TGIF
Dec 9, 2016 6:01 AM - Bill Monroe: indeed
Dec 9, 2016 6:02 AM - JeffTheMess: when you flying out?
Dec 9, 2016 6:07 AM - Bill Monroe: sometime this morning... was just checking weather
Dec 9, 2016 6:08 AM - JeffTheMess: pretty good
Dec 9, 2016 6:09 AM - Bill Monroe: so far.. forcast is for rain in socal over the weekend.
Dec 9, 2016 6:09 AM - Bill Monroe: winds look good, which is my main concern... I hate turbulence
Dec 9, 2016 6:11 AM - Bill Monroe: got tix for the pops concert...
Dec 9, 2016 6:11 AM - Bill Monroe: and reservations for the ATV tour
Dec 9, 2016 6:15 AM - Bill Monroe: gunna take a look at a plane while I'm there.. seems like a really good deal, motivated seller
Dec 9, 2016 6:17 AM - JeffTheMess: might as well
Dec 9, 2016 6:22 AM - Bill Monroe: 2.0 would like it I think.. pressurized with a restroom..
Dec 9, 2016 6:22 AM - Bill Monroe: a lot more room
Dec 9, 2016 11:18 AM - daniel871:
Dec 9, 2016 11:36 AM - daniel871:

 

Dec 10, 2016 6:04 AM - Bill Monroe: Good Morning

 

Dec 11, 2016 at 6:14 AM - Bill Monroe: Good morning 24 hours later

 

Dec 12, 2016 at 5:52 AM - danzca6: Morning Bill 24 hours later
Dec 12, 2016 at 5:52 AM - Bill Monroe: Hey Dan, what's the latest?
Dec 12, 2016 at 5:53 AM - danzca6: not much...got near 10" of snow over the weekend. Roads are still slick on the way to work this morning.
Dec 12, 2016 at 5:53 AM - Bill Monroe: nice!
Dec 12, 2016 at 5:53 AM - Geof: Morning gents
Dec 12, 2016 at 5:53 AM - danzca6: yeah, spent a lot of time outside playing in it
Dec 12, 2016 at 5:53 AM - Bill Monroe: Geof
Dec 12, 2016 at 5:53 AM - danzca6: Morning Geof
Dec 12, 2016 at 5:54 AM - Geof: Whats happnin guys
Dec 12, 2016 at 5:54 AM - Bill Monroe: It's been 60 and clear here.. was crystal-clear in Arizona over the weekend
Dec 12, 2016 at 5:54 AM - danzca6: back to work...toys are at home...
Dec 12, 2016 at 5:54 AM - danzca6: Nice Bill...I love snow....but I do like warm days
Dec 12, 2016 at 5:55 AM - danzca6: had the hot tub open last night
Dec 12, 2016 at 5:55 AM - danzca6: feels good after being in the cold all day
Dec 12, 2016 at 5:55 AM - Bill Monroe: 2.0 would do anything to have snow
Dec 12, 2016 at 5:55 AM - danzca6: come up to IL, we have enough for everyone
Dec 12, 2016 at 5:56 AM - Geof: Lol none here danz. All melting just cold as crap lol
Dec 12, 2016 at 5:56 AM - danzca6: Bill, you should see the tiny things Geof is printing
Dec 12, 2016 at 5:56 AM - Bill Monroe: I'm taking her to Brekenridge for xmas.. she doesnt know yet
Dec 12, 2016 at 5:56 AM - danzca6: awesome
Dec 12, 2016 at 5:56 AM - Bill Monroe: tiny things? why?
Dec 12, 2016 at 5:57 AM - danzca6: because he can...hahaha...my son saw them so now I ordered the tiny nozzle from E3D to print some detailed lego pieces he has been wanting
Dec 12, 2016 at 5:58 AM - Bill Monroe: i like to print big stuff
Dec 12, 2016 at 5:58 AM - Bill Monroe: I'd love to get my hands on a concrete printer to make myshop with
Dec 12, 2016 at 5:58 AM - danzca6: did you get your christmas shopping all done?
Dec 12, 2016 at 5:59 AM - Bill Monroe: actually pretty much... got 2.0 and sister taken care off.. all my kids will be getting money cards
Dec 12, 2016 at 6:00 AM - danzca6: yeah they get to an age and that is almost easier
Dec 12, 2016 at 6:00 AM - danzca6: My wife hates buying for me because if I see something I want I normally just buy it
Dec 12, 2016 at 6:00 AM - Bill Monroe: ya, oldest and youngest both bought homes so Home Depot cards are the thing
Dec 12, 2016 at 6:01 AM - Bill Monroe: i told 2.0 I wanted a sine vise... it'llbefun to see if she figured it out
Dec 12, 2016 at 6:01 AM - Geof: Tiny things because the robo is now retired from production and just a toy lol. The other printer took its place
Dec 12, 2016 at 6:01 AM - Geof:
Dec 12, 2016 at 6:02 AM - danzca6: you retired the robo?
Dec 12, 2016 at 6:02 AM - Geof: High resolution prints on the robo .07-.015 layers going forward
Dec 12, 2016 at 6:02 AM - Geof: Yessir. Its now a toy lol. The prusa took the robos place and the UM took the prusas lol
Dec 12, 2016 at 6:04 AM - danzca6: it's crazy to get that kind of layer height out of it
Dec 12, 2016 at 6:04 AM - Bill Monroe: my robo is basically my son's now as he uses it more than I.. my homebrew has been bullet-proof and does ABS like a pro machine
Dec 12, 2016 at 6:04 AM - Geof: it may go back into production if I find an actual end use for something that high resolution off a printer.
Dec 12, 2016 at 6:05 AM - Geof: Bill you have any pics of the homebrew set up? I'd be intrigued to see. The only no hassle ABS machines I have are those zortrax.
Dec 12, 2016 at 6:05 AM - danzca6: shoot the UM can do .02
Dec 12, 2016 at 6:05 AM - Geof: yes, with the .25 nozzle it came with and considerably faster than the robo, but to new to try anything until I get it running reliably (proven lol)
Dec 12, 2016 at 6:05 AM - Geof: hate to think what that fail would have done if I dind't have a back up going
Dec 12, 2016 at 6:06 AM - danzca6: should put the skull helmet on top of the fail
Dec 12, 2016 at 6:07 AM - Bill Monroe: idont have pics.. it's in the hanger and I always forget, but they would be uninteresting anyway as the insulation, heater bars, and fans hide everything
Dec 12, 2016 at 6:07 AM - Geof: lol. It was pretty epic. 29 hours in and bam huge layer shift.
Dec 12, 2016 at 6:07 AM - danzca6: was it the pulley being loose that caused it?
Dec 12, 2016 at 6:08 AM - Bill Monroe: i basically emulated all the neat stuff in a Stratasys Prodigy, except my nozzles ride on seperate carriages
Dec 12, 2016 at 6:08 AM - danzca6: like your sigma geof
Dec 12, 2016 at 6:09 AM - Geof: I think so Danz. Wont know for sure without more testing. I'm guessing it was either that or not enough lubrication on the rods (there was some but my ditto also gantry needs a ton to move smoothly at the speeds it prints)
Dec 12, 2016 at 6:09 AM - Geof: Dual Extruder bill?
Dec 12, 2016 at 6:09 AM - Bill Monroe: ya.. dual
Dec 12, 2016 at 6:10 AM - Bill Monroe: seperate carriages solved all the problems on the cheap
Dec 12, 2016 at 6:10 AM - Geof: any issues your finding with the 2 seperate carriages? The sigma is painfully slow.
Dec 12, 2016 at 6:10 AM - Geof: (alot of travel time betweent he two with the constant going home)
Dec 12, 2016 at 6:10 AM - Bill Monroe: not a single one.. I really like being able to purge and whipe the nozzles each time, just like the pro machines
Dec 12, 2016 at 6:12 AM - Bill Monroe: i also abandoned the reprap model... my surface moves up and down. the X carriages ride on a gantry for Y
Dec 12, 2016 at 6:16 AM - danzca6: haha...just got a text from my coworker. I put a 4 ft tall darth vader in her office this morning for her son. Scared the crap out of her when she turned on the lights
Dec 12, 2016 at 6:20 AM - Geof: have you seen the sigma Bill? Sounds alot like that, just dual extrusion probably 2.5x longer print times than single (I was expecting that lol). Your machine sounds incredibly similar.
Dec 12, 2016 at 6:21 AM - Bill Monroe: i've seen pics.. dont know why it would take all that much longer unless their nozzle-change routine is inefficient
Dec 12, 2016 at 6:22 AM - Bill Monroe: mine is much bigger though...
Dec 12, 2016 at 6:27 AM - Geof: no its pretty much finish, go home, next one starts. just adds a lot of time swapping (the one going home has to get home before the other comes out to play)
Dec 12, 2016 at 6:30 AM - danzca6: ok...I have a spare toaster over and have been thinking of making it into a reflow oven http://whizoo.com/
Dec 12, 2016 at 6:30 AM - danzca6: maybe I'm just being crazy
Dec 12, 2016 at 6:30 AM - Geof: reflow for surface mount?
Dec 12, 2016 at 6:30 AM - danzca6: yep
Dec 12, 2016 at 6:31 AM - Geof: I use a variable temp heat gun that I have for heat shrink tubing lol
Dec 12, 2016 at 6:31 AM - danzca6: does that work pretty well?
Dec 12, 2016 at 6:32 AM - Geof: lol I dont know about well but its functional. I'm a mechanic so not much care goes into stuff as long as it functions properly at the end . I have the JST certs for surface mount rework and their tools pretty much looked just like it lol
Dec 12, 2016 at 6:32 AM - Geof: but had a nifty stand to hold the board
Dec 12, 2016 at 6:33 AM - daniel871: This is a review for the printer Geof is talking about Bill. http://3dprintingcenter.net/2016/06/13/sigma-from-bcn3d-3d-printer-review/
Dec 12, 2016 at 6:33 AM - daniel871: A fair number of pictures in it.
Dec 12, 2016 at 6:34 AM - Bill Monroe: seen it
Dec 12, 2016 at 6:34 AM - danzca6: I just want to get into electonics more and thought it might be fun...I'll see how it goes
Dec 12, 2016 at 6:34 AM - danzca6: morning daniel
Dec 12, 2016 at 6:34 AM - Bill Monroe: i finished mine mid 2014. old news now.
Dec 12, 2016 at 6:34 AM - Bill Monroe: wait.. mid 2015
Dec 12, 2016 at 6:35 AM - daniel871: Morning.
Dec 12, 2016 at 6:35 AM - daniel871: I was expecting it to be much colder today and wore warm clothes to work.
Dec 12, 2016 at 6:36 AM - WheresWaldo: Morning gentlemen.
Dec 12, 2016 at 6:37 AM - danzca6: morning WW
Dec 12, 2016 at 6:37 AM - WheresWaldo: What's everyone up to this morning?
Dec 12, 2016 at 6:37 AM - danzca6: brb...cookie run
Dec 12, 2016 at 6:37 AM - daniel871: Well, nothing glamorous, but I've figured out a semi-useful purpose for my 3d printer.
Dec 12, 2016 at 6:38 AM - WheresWaldo: Pray tell?
Dec 12, 2016 at 6:38 AM - daniel871: Templates for marking/drilling/etc. assembly pieces for some craft kits for wood decorative stuff my mom comes up with.
Dec 12, 2016 at 6:39 AM - WheresWaldo: A useful purpose, I have made drill guides also, works great for that.
Dec 12, 2016 at 6:39 AM - daniel871: Relatively thin template panels to follow with a laminate trimmer, etc.
Dec 12, 2016 at 6:40 AM - daniel871: Stuff to use in the interim while figuring out the best way to mimic the Maslow CNC design that has been published so far.
Dec 12, 2016 at 6:41 AM - Geof: hi waldo, hi daniel.
Dec 12, 2016 at 6:41 AM - WheresWaldo: Geof
Dec 12, 2016 at 6:46 AM - WheresWaldo: So Geof, what's new?
Dec 12, 2016 at 6:47 AM - daniel871: Did anyone else back that LokBuild project?
Dec 12, 2016 at 6:48 AM - WheresWaldo: I have stayed away from most kickstarter projects.
Dec 12, 2016 at 6:49 AM - daniel871: I've only backed two.
Dec 12, 2016 at 6:49 AM - daniel871: Looks like both of them might actually ship.
Dec 12, 2016 at 6:51 AM - Geof: Hey Waldo. Not much man, UM and baby nozzle lol
Dec 12, 2016 at 6:55 AM - WheresWaldo: I am taking a break for a bit, just playing around with the new OctoPrint 1.3.0 and seeing if I can muck up a better theme than the one Robo forked from someone else. Until I get the LED's I ordered.
Dec 12, 2016 at 6:57 AM - Geof: yea? No printing happening?
Dec 12, 2016 at 7:00 AM - WheresWaldo: Not at the moment, I have everything I sell tested now. So I need to design a new Robo foot with a GoPro mount on it to use for the OctoPrint project but that is about it. Oh that an a new UM style extruder for my Eustathios Spider.
Dec 12, 2016 at 7:06 AM - danzca6: WW I did a remix of your 30mm fan mount that makes the channels for the wires bigger. I hope to install it this week sometime

 

Dec 12, 2016 at 7:07 AM - danzca6: My 25mm fan is giving up on me
Dec 12, 2016 at 7:08 AM - WheresWaldo: Cool, I rarely go back to old models, so I appreciate it when someone else fixes my stupid mistakes.
Dec 12, 2016 at 7:08 AM - WheresWaldo: 25 mm fans all suck.
Dec 12, 2016 at 7:09 AM - danzca6: they do indeed
Dec 12, 2016 at 7:09 AM - danzca6: If it works I'll post it on Thingiverse
Dec 12, 2016 at 7:10 AM - danzca6: I seem to never have enough room with the wires
Dec 12, 2016 at 7:11 AM - Geof: Using the olson style extruder waldo ?
Dec 12, 2016 at 7:11 AM - danzca6: oh, and I tested the temp stat led feature...doesn't work the way I thought it should, but it does work
Dec 12, 2016 at 7:19 AM - WheresWaldo: No, I modified the new E3D STEP files to work on the Spider.
Dec 12, 2016 at 7:19 AM - WheresWaldo: Dan, what did you expect?
Dec 12, 2016 at 7:21 AM - danzca6: I expected it to light up blue while heating until it got past a certain temp (55) and then turn red. Looks like it is red while heating and will turn blue while cooling
Dec 12, 2016 at 7:22 AM - WheresWaldo: Well that is different than the comments in the code, but workable.
Dec 12, 2016 at 7:22 AM - danzca6: right, that is what confused me at first
Dec 12, 2016 at 7:23 AM - danzca6: I wish the RAMPS had more servo pins
Dec 12, 2016 at 7:23 AM - danzca6: I really like my RRD fan extender, but would have to give it up for the LED
Dec 12, 2016 at 7:23 AM - WheresWaldo: It could be that they haven't updated that part of the code, yet.
Dec 12, 2016 at 7:24 AM - danzca6: I see that a place in AU has what is called TinyFan that replaced the RRD and only uses 2 of the servo pins
Dec 12, 2016 at 7:24 AM - danzca6: so I could do the Blue and Red led pins
Dec 12, 2016 at 7:24 AM - WheresWaldo: You could tap into the connector for the fan, just solder a few wire leads. As far as I can tell, even thogh the smart adapter covers all the pins, the LCD doesn't use them all.
Dec 12, 2016 at 7:25 AM - danzca6: hmmm
Dec 12, 2016 at 7:25 AM - danzca6: I may look into that
Dec 12, 2016 at 7:25 AM - danzca6: thanks
Dec 12, 2016 at 7:25 AM - WheresWaldo: I meant LCD not fan
Dec 12, 2016 at 7:25 AM - danzca6: yeah I knew what you meant
Dec 12, 2016 at 7:26 AM - danzca6: This is why I need another printer...I play too much with it and lose printing time
Dec 12, 2016 at 7:26 AM - WheresWaldo: I think the default is pins 34, 35 and 43 IIRC.
Dec 12, 2016 at 7:27 AM - WheresWaldo: I am still waiting for Robo to offer me a free R2,
Dec 12, 2016 at 7:27 AM - danzca6: they ever announce the winners for the model challenge you entered
Dec 12, 2016 at 7:27 AM - danzca6: I think a lot of folks are waiting for them to just ship the C2
Dec 12, 2016 at 7:28 AM - WheresWaldo: Yes, only on their facebook page. Don't use Facebook, so didn't care. Especially since it wasn't me.
Dec 12, 2016 at 7:28 AM - danzca6: yeah I don't use it either
Dec 12, 2016 at 7:28 AM - danzca6: I do wonder what designs they picked now...yours sounded pretty cool
Dec 12, 2016 at 7:29 AM - WheresWaldo: They are still working on the interface. They really need to hire real full-time programmers and stop doing all this stupid forking and modifying of others code.
Dec 12, 2016 at 7:30 AM - WheresWaldo: I'll send you my Fusion 360 file, or make it public on Autodesk.
Dec 12, 2016 at 7:30 AM - danzca6: yeah I would like to see it if you don't mind
Dec 12, 2016 at 7:31 AM - Geof: Hey Waldo, we've been hearing about gifted printers for a while now...I'm thinking maybe just talk at this point
Dec 12, 2016 at 7:32 AM - Geof: I'm guessing they have hit some serious issues with the production of them, I havent seen anyone with one and it was suppose to ship November?
Dec 12, 2016 at 7:34 AM - WheresWaldo: https://gallery.autodesk.com/fusion360/projects/pc-accessories?popupSNS=true
Dec 12, 2016 at 7:34 AM - danzca6: last update is they sent out a survey to the C2 backers
Dec 12, 2016 at 7:34 AM - Geof: a survey?
Dec 12, 2016 at 7:34 AM - WheresWaldo: I really think it is software issues. They pulled their GITHUB repository on the LCD
Dec 12, 2016 at 7:34 AM - danzca6: yeah not sure if that was to collect shipping info or not
Dec 12, 2016 at 7:35 AM - WheresWaldo: Even though the LCD was forked from someone else.
Dec 12, 2016 at 7:35 AM - danzca6: I think you might be right WW, too much was not being shown during the KS to make me feel like everything was totally baked yet
Dec 12, 2016 at 7:35 AM - WheresWaldo: And their octoprint_robotheme still needs a lot of work.
Dec 12, 2016 at 7:36 AM - WheresWaldo: Again forked from Voxel8
Dec 12, 2016 at 7:36 AM - Geof: I could believe that . I never actually saw a running machine that I can recall just a machine with a print on the bed.
Dec 12, 2016 at 7:37 AM - WheresWaldo: I did look at the new Leapfrog Bolt and what they have done with OctoPrint. They actually built a responsive theme for it. I think it is ugly, but shows potential.
Dec 12, 2016 at 7:39 AM - WheresWaldo: All I am trying to do is mimic most of the functionality with new icons, and I didn't want to start with OctoPi. I think it is kinda bloated.
Dec 12, 2016 at 7:39 AM - WheresWaldo: Dan, were you able to see Autodesk link.
Dec 12, 2016 at 7:40 AM - danzca6: yes i was able to open it
Dec 12, 2016 at 7:41 AM - danzca6: looks good. I'll have to take a closer look when I get home tonight
Dec 12, 2016 at 7:42 AM - WheresWaldo: Pretty simple design, but I thought it might be nice to print and assemble for their intended market.
Dec 12, 2016 at 7:46 AM - danzca6: Can't seem to find pin 34 on the RAMPS lol...pin 43 is open on aux-4, but pin 35 is used for the controller
Dec 12, 2016 at 7:51 AM - WheresWaldo: I don't know why they used D34, that is used by E1 for Direction.
Dec 12, 2016 at 7:51 AM - WheresWaldo: Maybe it's a typo.
Dec 12, 2016 at 7:51 AM - WheresWaldo: I don't think the controller actually uses D35, I think it is just covered.
Dec 12, 2016 at 7:54 AM - danzca6: no it does. I checked the schematics and even the pin assignements show it in Marlin
Dec 12, 2016 at 7:54 AM - danzca6: for pin D35
Dec 12, 2016 at 7:55 AM - WheresWaldo: Ah, okay. There just isn't a lot of documentation or anyone that has tried and published on the web.
Dec 12, 2016 at 7:56 AM - danzca6: yeah...the one extra pin, D43 might be enough for me though
Dec 12, 2016 at 7:57 AM - WheresWaldo: Do you know what LED2-4 do on the RAMPS board?
Dec 12, 2016 at 7:57 AM - danzca6: I may redisign the LCD enclosure to account for the single LCD board just for fun
Dec 12, 2016 at 7:57 AM - danzca6: ummm...not off hand
Dec 12, 2016 at 7:57 AM - WheresWaldo: I think LED1 is on all the time there is power
Dec 12, 2016 at 7:58 AM - danzca6: 3/4 might be for when uploading
Dec 12, 2016 at 7:58 AM - danzca6: I think I see one of those flashing when communicating with the PC
Dec 12, 2016 at 7:59 AM - danzca6: I'd have to look closer
Dec 12, 2016 at 7:59 AM - WheresWaldo: okay, I guess I need to watch them, LED2 is behind on of the MOSFETs, Q3.
Dec 12, 2016 at 7:59 AM - danzca6: yep
Dec 12, 2016 at 8:00 AM - WheresWaldo: I would rather Marlin control all that stuff, rather than relying on OctoPrint.
Dec 12, 2016 at 8:04 AM - danzca6: my son and I are building a tabletop arcade machine. So I have another rPi3 coming for that. I need to play more with OctoPrint
Dec 12, 2016 at 8:05 AM - WheresWaldo: I have a build that will fit on a 4GB microSD, smaller than OctoPi and more in line with the official OctoPrint Wiki.
Dec 12, 2016 at 8:07 AM - WheresWaldo: I am using the newest Jessie_lite and drivers for the Waveshare 3.5", but all the Waveshare drivers are there. Still not TFT UI.
Dec 12, 2016 at 1:24 PM - David Sale: Hello all. I have a question, to run by you all before I create a post. When I start a new print it is as if the extruder is 1 or 2 mm "to low". It will dig in to the tape sometimes. After the first pass or two everything seems to come out fine. Any ideas?
Dec 12, 2016 at 2:22 PM - Toro1966: Afternoon all!
Dec 12, 2016 at 2:44 PM - BryZad: Afternoon

 

Dec 13, 2016 5:14 AM - Bill Monroe: morning
Dec 13, 2016 6:41 AM - BryZad: Morning bill
Dec 13, 2016 6:42 AM - Bill Monroe: hey Bry.. what's the latest?
Dec 13, 2016 10:25 AM - BryZad: Not a whole lot just plugging away living the dream
Dec 13, 2016 11:15 AM - daniel871:
Dec 13, 2016 11:58 AM - Shane Simino: Hey Geoff. How's that UM2?
Dec 13, 2016 12:39 PM - Geof: Hi shane. Going well. Had a layer shift issue but believe its been resolved. Printing strong
Dec 13, 2016 1:04 PM - Shane Simino: And how does the print quality compare?
Dec 13, 2016 6:11 PM - Geof: Sorry for the delay. Mt r1+ is pretty tined but cant compete in print quality. Diifferent style priner. This one from factory is capable of 20 micron printing

 

Dec 14, 2016 5:18 AM - daniel871: https://i.imgur.com/wYahuwm.gifv
Dec 14, 2016 5:27 AM - daniel871: http://i.imgur.com/2IAgR9i.jpg
Dec 14, 2016 8:00 AM - Bill Monroe: morning
Dec 14, 2016 8:27 AM - Bill Monroe: Today's project:
Dec 14, 2016 1:22 PM - daniel871: Well, this was pretty funny. https://twitter.com/tonyszhou/status/795770852960661505?ref_src=twsrc^tfw
Dec 14, 2016 2:19 PM - BryZad: Any one living in Cali ?
Dec 14, 2016 3:44 PM - Bill Monroe: San Diego here
Dec 14, 2016 7:02 PM - Geof: Hi all

 

Dec 15, 2016 5:00 AM - JeffTheMess: best clock
Dec 15, 2016 5:01 AM - JeffTheMess: morning roboneers
Dec 15, 2016 5:34 AM - Shane Simino: Morning!
Dec 15, 2016 5:37 AM - JeffTheMess: hi there
Dec 15, 2016 6:34 AM - daniel871: The post I quoted in this post was pretty funny http://community.robo3d.com/index.p...ith-brand-new-printer.17246/page-2#post-98422
Dec 15, 2016 6:40 AM - JeffTheMess: funny
Dec 15, 2016 7:53 AM - Toro1966: Morning all
Dec 15, 2016 9:01 AM - daniel871: Man, this guy is really enthusiastic about selling this lathe.
Dec 15, 2016 9:51 AM - BryZad: Hi all
Dec 15, 2016 9:51 AM - BryZad: Hows it going bill

 

Dec 16, 2016 at 4:30 AM - JeffTheMess: https://imgur.com/a/vyrx1
Dec 16, 2016 at 4:30 AM - JeffTheMess: morning robonauts
Dec 16, 2016 at 5:11 AM - WheresWaldo: Morning
Dec 16, 2016 at 5:18 AM - JeffTheMess: whatsup
Dec 16, 2016 at 5:20 AM - WheresWaldo: Not much this morning. Need to print a couple of things, but's that's about it, you?
Dec 16, 2016 at 5:21 AM - JeffTheMess: same here, want to go home and print
Dec 16, 2016 at 5:22 AM - Bill Monroe: morning
Dec 16, 2016 at 5:26 AM - WheresWaldo: Bill
Dec 16, 2016 at 5:27 AM - Bill Monroe: Waldo
Dec 16, 2016 at 5:30 AM - JeffTheMess: picture is yuge
Dec 16, 2016 at 5:30 AM - WheresWaldo: Nice. You know Bill, I spent 20 years in the software business but still love all things mechanical. I would have loved to have owned a CNC machine at some point in time.
Dec 16, 2016 at 5:30 AM - JeffTheMess: https://www.amazon.com/HTPOW-Engrav...UTF8&qid=1481894650&sr=8-1&keywords=laser+cnc cheapo laser cnc
Dec 16, 2016 at 5:30 AM - Bill Monroe: ya workin on it
Dec 16, 2016 at 5:31 AM - Bill Monroe: First part done:
Dec 16, 2016 at 5:31 AM - WheresWaldo: JTM, that is a toy, I mean big boy toys like Bill has.
Dec 16, 2016 at 5:31 AM - Bill Monroe: Durn Hi-res iphone camera
Dec 16, 2016 at 5:32 AM - JeffTheMess: oh yeah ofcourse, I want one to start off with
Dec 16, 2016 at 5:33 AM - Bill Monroe: ya, 1.5" square area isnt much engraving area
Dec 16, 2016 at 5:34 AM - Bill Monroe: my son and I are talking about making a lil 8X10 just for laster engraving
Dec 16, 2016 at 5:34 AM - WheresWaldo: When I was in my 20's I wanted a lathe, never got it. Then in my 40's a waterjet, never got it. Now approaching 60 I would love a CNC mill and a Laser cutter, probably won't get those either.
Dec 16, 2016 at 5:34 AM - Bill Monroe: were getting some mad rain right now..
Dec 16, 2016 at 5:35 AM - WheresWaldo: My folks live in Eugene, they are getting frozen in I heard.
Dec 16, 2016 at 5:35 AM - JeffTheMess: wow
Dec 16, 2016 at 5:35 AM - Bill Monroe: bah.. find a used Tormach and make youself a laser cutter.. by this time next year you'll be making lots of stuff
Dec 16, 2016 at 5:38 AM - Bill Monroe:
Dec 16, 2016 at 5:39 AM - BryZad: Hows things bill
Dec 16, 2016 at 5:40 AM - Bill Monroe: Hey Bry.. pretty good... gotta fire going, it's raining, making some parts on the CNC, and 2.0 is making breakfast wearing only her sandals... not too bad of a Friday start
Dec 16, 2016 at 5:41 AM - BryZad: Ha ha thats awesome
Dec 16, 2016 at 5:42 AM - BryZad: Yeah its supposed to be in the 70s here
Dec 16, 2016 at 5:42 AM - Bill Monroe: where?
Dec 16, 2016 at 5:46 AM - BryZad: Az
Dec 16, 2016 at 5:47 AM - BryZad: Are you going to the moving sale for RoBo ?
Dec 16, 2016 at 5:49 AM - Bill Monroe: didnt know anything about it.. where they moving to?
Dec 16, 2016 at 5:50 AM - JeffTheMess: somewhere cheaper?
Dec 16, 2016 at 5:53 AM - BryZad: Not sure but they have boxes full of parts that Jerry is just like yard selling off
Dec 16, 2016 at 5:54 AM - BryZad: Mostly looks like R1 parts and there is some leed screw steppers
Dec 16, 2016 at 5:54 AM - Bill Monroe: printer parts?
Dec 16, 2016 at 5:54 AM - Bill Monroe: ya.. i have no desire for that stuff
Dec 16, 2016 at 5:54 AM - BryZad: Lol
Dec 16, 2016 at 5:55 AM - BryZad: What it looked like was printer parts and hot ends ect
Dec 16, 2016 at 5:55 AM - Bill Monroe: looking at the prices for refurb R1 units.. they really think their stuff is worth money
Dec 16, 2016 at 5:56 AM - Bill Monroe: gotta run another part... back shortly
Dec 16, 2016 at 6:31 AM - Bill Monroe: Done:
Dec 16, 2016 at 6:31 AM - Bill Monroe: now to anodize them
Dec 16, 2016 at 6:37 AM - BryZad: Nice what are you using them for ?
Dec 16, 2016 at 6:38 AM - Bill Monroe: coupler to connect elevator trim cable to actuating crank on my vintage plane
Dec 16, 2016 at 6:39 AM - Bill Monroe: cable broke 5 miles from the airport furing an IFR approach.. some real pucker factor that day
Dec 16, 2016 at 6:42 AM - Bill Monroe: Here's the design:
Dec 16, 2016 at 8:10 AM - BryZad: That's awesome did you mill the top and then made another pice ?
Dec 16, 2016 at 5:09 PM - Toro1966: Evening all.
Dec 16, 2016 at 5:12 PM - Toro1966: Been quiet in here lately.
Dec 16, 2016 at 5:31 PM - Geof: Hey toro
Dec 16, 2016 at 6:52 PM - Toro1966: Hey geof
Dec 16, 2016 at 6:52 PM - Toro1966: Making a how-to doc for installing an E3DV6.
Dec 16, 2016 at 7:00 PM - Geof: Nice !
Dec 16, 2016 at 7:01 PM - Geof: Been staying busy ?
Dec 16, 2016 at 7:23 PM - Toro1966: More thna you know!
Dec 16, 2016 at 7:24 PM - Toro1966: Crazy here. How about you?
Dec 16, 2016 at 7:24 PM - Geof: Bout the same buddy lol
Dec 16, 2016 at 7:25 PM - Toro1966: It's the double edged sword of this time of year. Love it - but crazy
Dec 16, 2016 at 7:27 PM - Toro1966: Should be posting the E3DV6 doc shortly. That way you guys cna give me some feedback if it needs changed. Just ahd a lot of questions on facebook lately and figured since I was installing one today, I would write it up.,
Dec 16, 2016 at 7:27 PM - Geof: Much appreciated ! I'm sure new installers will be grateful for sure.
Dec 16, 2016 at 7:28 PM - Geof: How's that mono price holding up?
Dec 16, 2016 at 7:29 PM - Toro1966: Working great!
Dec 16, 2016 at 7:30 PM - Toro1966: Ironically, the buildtak they include is so good I usually use a raft because if I don't it is hell to get off the bed. Lol.]
Dec 16, 2016 at 7:30 PM - Toro1966: Hows that Mk2?
Dec 16, 2016 at 7:30 PM - Geof: Nice ! Glad to hear
Dec 16, 2016 at 7:30 PM - Geof: Lol rafts....
Dec 16, 2016 at 7:30 PM - Toro1966: Yep - never use them on anything else - but it makes removing stuff from the MP much easier.
Dec 16, 2016 at 7:31 PM - Geof: Mk2 is doing its thing, non stop production jobs since I got it
Dec 16, 2016 at 7:31 PM - Toro1966: Excellent. How's the quality out of the box?
Dec 16, 2016 at 7:31 PM - Geof: Getting ready to order a new toy. mk2 and UM are both in the job mode lol
Dec 16, 2016 at 7:32 PM - Geof: Mk2 quality out of the box is great in my opinion. Smooth little machine
Dec 16, 2016 at 7:33 PM - Geof: Only tweaks I've done is basic settings for my preferred printing
Dec 16, 2016 at 7:36 PM - Toro1966: nice. What toy you buying?
Dec 16, 2016 at 7:37 PM - Geof: Gmax
Dec 16, 2016 at 7:38 PM - Geof: I think it will do just fine for the print service Lol
Dec 16, 2016 at 7:38 PM - Toro1966: Going to have to look that one up. Can we post files on our threads here?
Dec 16, 2016 at 7:39 PM - Geof: Depends on the size but yes most likely. May need to zip it if it's to large
Dec 16, 2016 at 7:39 PM - Geof: Ultimakers tall print size had me set on being able to do large size all in one prints plus I'm out of capacity again lol
Dec 16, 2016 at 7:39 PM - Toro1966: Ok - going to look again. Can't find the button to do it.
Dec 16, 2016 at 7:40 PM - Geof: Should be the attach file when your in your post
Dec 16, 2016 at 7:41 PM - Toro1966: Nice printer!
Dec 16, 2016 at 7:41 PM - Geof: I'm sorry upload a file lol
Dec 16, 2016 at 7:41 PM - Toro1966: Just looked it up!
Dec 16, 2016 at 7:41 PM - Geof: It will be a good one lol (I think). If not spose I'll just have to fix it lol
Dec 16, 2016 at 7:42 PM - Toro1966: That's the best part - fixing them Still can't find that button. There is a link and an image button, but no insert file button.
Dec 16, 2016 at 7:43 PM - Geof: You want to be writing a thread or whatnot. It's the same button to upload pictures
Dec 16, 2016 at 7:44 PM - Geof: Lol no I need mine running or I go broke lol. Don't need anymore headaches lolol
Dec 16, 2016 at 7:44 PM - Toro1966: Ahhh. Got it.
Dec 16, 2016 at 7:44 PM - Geof: Got it to load up ?
Dec 16, 2016 at 7:47 PM - Toro1966: No - just allows you to link a URL. I uploaded it to dropbox and then provided the link. Should be live now.
Dec 16, 2016 at 7:47 PM - Toro1966: Let me know if you can't access it.
Dec 16, 2016 at 7:48 PM - Geof: I've got it pulled up
Dec 16, 2016 at 7:50 PM - Toro1966: Cool. Let me know what you think.
Dec 16, 2016 at 7:51 PM - Geof: Looks pretty good to me from what I remember of the install
Dec 16, 2016 at 7:51 PM - Geof: Great job
Dec 16, 2016 at 7:54 PM - Geof: You've got two robos and the MP now?
Dec 16, 2016 at 7:54 PM - Toro1966: Thanks. Better than nothing anyway
Dec 16, 2016 at 7:54 PM - Toro1966: Yep.

 

Dec 16, 2016 at 7:54 PM - Toro1966: Apparently I'm addcited
Dec 16, 2016 at 7:54 PM - Geof: Nice, more plastic/hour lol
Dec 16, 2016 at 7:55 PM - Geof: Lol if I said anything it'd be the pot calling the kettle situation lol
Dec 16, 2016 at 7:55 PM - Toro1966: Lol. Exactly. Never can have too many!
Dec 16, 2016 at 7:56 PM - Geof: Lol I'm sure there is a number I just haven't hit it yet lol